Important: Our new home for AFM probes is launching. The US and Canada is now served at . Australia, India, Singapore, South Korea, and Taiwan are served at . You must create a MyOI account to use the store, instructions here . If you have any questions or concerns please contact:


Product was successfully added to your shopping cart.



Quick Overview

Conductive probe for electrical measurements in soft tapping mode.

f = 160 kHz   |   k = 7.4 N/m   |   tip coating: Pt/Ir
製品 単価 個数
PPP-NCSTPt (50 Pack)
(Ships in 1-2 Weeks)
PPP-NCSTPt (20 Pack)
(Ships in 1-2 Weeks)
PPP-NCSTPt (10 Pack)
(Ships in 1-2 Weeks)


PointProbe® Plus Non-Contact / Soft Tapping Mode - PtIr5 Coating

The PointProbe® Plus (PPP) combines the well-known features of the proven PointProbe® series such as high application versatility and compatibility with most commercial SPMs with a further reduced and more reproducible tip radius as well as a more defined tip shape.
NANOSENSORS™ PPP-NCSTPt AFM probes are designed for non-contact or soft tapping mode imaging. The combination of soft cantilever and fairly high resonance frequency enables stable and fast measurements with reduced tip-sample interaction. This feature significantly reduces tip wear and sample wear at the same time.

The probe offers unique features:
  • Metallic conductivity of the tip
  • Radius of curvature better than 25 nm
  • Tip height 10 - 15 µm
  • High mechanical Q-factor for high sensitivity

    The PtIr5 coating is an approximately 25 nm thick double layer of chromium and platinum iridium5 on both sides of the cantilever. The tip side coating enhances the conductivity of the tip and allows electrical contacts. The detector side coating enhances the reflectivity of the laser beam by a factor of about 2 and prevents light from interfering within the cantilever. The coating process is optimized for stress compensation and wear resistance. The bending of the cantilever due to stress is less than 3.5% of the cantilever length.

    Please note: Wear at the tip can occur if operating in contact-, friction- or force modulation mode.

    Cantilever Specifications
    Spring k (N/m 7.4 (1.2 - 29)
    Freq (kHz) 160 (75 - 265)
    Length (µm) 150 (140 - 160)
    Width (µm) 27 (19.5 - 34.5)
    Thickness (µm) 2.8 (1.8 - 3.8)
    Shape rectangular
    Material Silicon
    Reflex Coating (nm) Cr/PtIr (5/25)

    Tip Specifications
    Tip radius (nm) 25
    Tip height (µm) 12.5 +/- 2.5
    Front angle (°) 25 +/- 2
    Back angle (°) 15 +/- 2
    Side angle (°) 22.5 +/- 2
    Tip shape 4-sided
    Tip material Silicon
    Tip coating (nm) Cr/PtIr (5/25)

  • Untitled Document

    Additional Information

    Tip Radius 25
    Tip Radius > 20 nm
    Spring Constant 7.4
    Frequency 160
    Compatibility blueDrive
    Manufacturer Nanosensors

    Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.

    1. このプローブのレビューを書く

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register